Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
RFD4031 UHF RFID Premium/Premium+ Sled Product Reference Guide
123RFID Mobile Application for Android
Connect to Reader Using Bluetooth
RFID Operations
Locate Tag
Locate Multiple Tags (Multi Tag)
RFD4031 UHF RFID Premium/Premium+ Product Reference Guide
RFD4031 UHF RFID Premium/Premium+ Product Reference Guide
About this Document
Related Documents
Notational Conventions
Service Information
Getting Started with the RFD4031
Device Installation
Device Removal
Battery Replacement
Pairing the Sled with a Mobile Computer
Using the Rubber Locking Foot
Charging
UI Indicators
LED Definitions
Beeper Indications
Trigger Modes
123RFID Mobile Application for Android
Installing the 123RFID Mobile Application for Android
Using the 123RFID Mobile Application for Android
Navigating 123RFID Mobile
Menu
Navigation Bar
Readers List (Available vs. Connected)
Connect a Reader
Connect to Reader Directly Using USB/Common IO
Connect to Reader Using Bluetooth
Pair Reader Using NFC Tag (Tap and Pair)
Scan and Pair - RFD40
Pair Reader By Scanning a Barcode
Pair Reader Manually
RFID Operations
Rapid Read
Inventory
Locate Tag
Pre Filters
Tag Write
c-123rfid-mobile-general-settings
Getting Help
123RFID Desktop Application
Application Features
Connect
Read
Reader Configuration
Reader Name
Parameter Settings
RFID Configuration
Scanning Configuration
Print Configuration
Firmware Management
Maintenance
Harmful Ingredients
Approved Cleaners
Cleaning the Sled
Technical Specifications
Troubleshooting
Locate Multiple Tags (Multi Tag)
Locate Multiple Tags (Multi Tag)
Locate Multiple Tags (Multi Tag)
Locate multiple tags by importing a csv file.
Multi Tag Locate supports ASCII mode. Enable ASCII mode from
Settings
>
Application
>
Global Settings
>
Enable ASCII Mode
.
To locate and track multiple tags:
Tap
Locate Tag
from the
Home
or
Menu
screen.
Select the
Import csv file
on the Multi Tag panel.
The csv file holds the EPC ID and RSSI value. The default RSSI for the EPC will be -33.
Select the file containing the specific tag information from the file manager to bring the file into the application.
Tap the
Reset Data
icon to reset the tag count and RSSI proximity %.
Tap the
Add Tag ID
icon to add the EPC value of interest to the dynamic list of EPC's. It can only add the value which is present in the imported csv file.
Tap the
Remove Tag ID
icon to remove the EPC value of non-interest from the dynamic list of EPC's. It can only remove the value which is present in the csv file.
Once you re-access the MultiTag Locate screen, the entire tag list from the csv file displays, if values were deleted dynamically.
Locate Tag