Launch the 123RFID Mobile Application for Android on the mobile device.
From the Readers list, tap on the available device listed under Available Readers to connect and view the Rapid Read screen.
Tap
Settings > RFID > Advanced Reader Options > Antenna
.
Power Level is set to 27.0 dBm by default. However, it is shown as 270 dbm because the value used is in units of tens of dBm. Japan units are set to a different default power level depending on the SKU type.
Tap the
Back
button and select
Regulatory
to set the region in which the device is operating.
By default, the fastest read profile is selected and configures the reader for the maximum power allowed based on the read profile. However, the dBm can be limited due to the regulatory requirements of the specified region in which the sled is being used.
