Dampen a soft cloth with one of the approved cleaning agents listed above or use pre-moistened wipes.
Gently wipe all surfaces, including the front, back, sides, top and bottom. Never apply liquid directly to the device. Be careful not to let liquid pool around the device window, trigger, cable connector or any other area on the device.
Be sure to clean the trigger and in between the trigger and the housing (use a cotton-tipped applicator to reach tight or inaccessible areas).
Do not spray water or other cleaning liquids directly into the exit window.
Wipe the device exit window with a lens tissue or other material suitable for cleaning optical material such as eyeglasses.
Immediately dry the device window after cleaning with a soft non-abrasive cloth to prevent streaking.
Allow the unit to air dry before use.
Connectors:
Dip the cotton portion of a cotton-tipped applicator in isopropyl alcohol.
Rub the cotton portion of the cotton-tipped applicator back-and-forth across the connector on the Zebra sled at least 3 times. Do not leave any cotton residue on the connector.
Use the cotton-tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.
Use a dry cotton tipped applicator and rub the cotton portion of the cotton-tipped applicator back-and-forth across the connectors at least 3 times. Do not leave any cotton residue on the connectors.
