• RFD4031 UHF RFID Premium/Premium+ Product Reference Guide
Beeper Indications
Beeper Indications

Beeper Indications

 The sled provides user feedback in the form of beeper tones for decode, battery, Bluetooth, and Wi-Fi states. 

Decode Beeper Indications

The following table outlines the context in which beeper feedback is provided and the indication that is presented for a specific decode event
Decode Beeper Indications
Condition
Tone
Good Decode
Short high tone
Decode Transmission Error
No beep
Good RFID Decode
Short medium tone
RFID Error
No beep
Error Message (Other)
No beep
Sled Memory Full (Batch Mode)
Long tones for 5 seconds

Battery Beeper Indications

The following table outlines the context in which decode LED feedback is provided and the indication that is presented for a given device state.
Battery Beeper Indications
Condition
Tone
Low Battery (20%)
Medium-length tones
Lower Battery (10%)
Short tones - repeat
Suspend
High/Medium/Low
Charging
Short tone when the charger is connected.
Fully Charged
One beep
Charging Error
Three beeps (single occurrence)
Power On
Low/Medium/High beep

Bluetooth Beeper Indications

The following table outlines the context in which beeper feedback is provided and the indication that is presented for a specific Bluetooth state.
Bluetooth Beeper Indications
Condition
Tone
On/Not Connected
No beep
On/Pairing in Process
No beep
On/Connected
Short/Low/High
Out of Range
Short/High/Low
Pairing Error
No beep
Off
No beep

Wi-Fi Beeper Indications

The following table outlines the context in which beeper feedback is provided and the indication that is presented for specific Wi-Fi states.
Wi-Fi Beeper Indications
Condition
Tone
On/Not Connected
No beep
On/Pairing in Process
No beep
On/Connected
Short/Low/High
Out of Range
Short/High/Low
Pairing Error
No beep
Off
No beep