Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
RFD4031 UHF RFID Premium/Premium+ Sled Product Reference Guide
123RFID Mobile Application for Android
Connect to Reader Using Bluetooth
RFID Operations
page
General Settings
Factory Reset
RFD4031 UHF RFID Premium/Premium+ Product Reference Guide
RFD4031 UHF RFID Premium/Premium+ Product Reference Guide
About this Document
Related Documents
Notational Conventions
Service Information
Getting Started with the RFD4031
Device Installation
Device Removal
Battery Replacement
Pairing the Sled with a Mobile Computer
Using the Rubber Locking Foot
Charging
UI Indicators
LED Definitions
Beeper Indications
Trigger Modes
123RFID Mobile Application for Android
Installing the 123RFID Mobile Application for Android
Using the 123RFID Mobile Application for Android
Navigating 123RFID Mobile
Menu
Navigation Bar
Readers List (Available vs. Connected)
Connect a Reader
Connect to Reader Directly Using USB/Common IO
Connect to Reader Using Bluetooth
Pair Reader Using NFC Tag (Tap and Pair)
Scan and Pair - RFD40
Pair Reader By Scanning a Barcode
Pair Reader Manually
RFID Operations
Rapid Read
Inventory
Locate Tag
Pre Filters
Tag Write
c-123rfid-mobile-general-settings
Getting Help
123RFID Desktop Application
Application Features
Connect
Read
Reader Configuration
Reader Name
Parameter Settings
RFID Configuration
Scanning Configuration
Print Configuration
Firmware Management
Maintenance
Harmful Ingredients
Approved Cleaners
Cleaning the Sled
Technical Specifications
Troubleshooting
Factory Reset
Factory Reset
Factory Reset
Performing a factory reset will clear any saved settings and restart the reader. Region needs to be set again.
To reset to factory defaults, from the bottom navigation bar, tap
Settings
>
General
>
Factory Reset
or tap
>
Settings
>
General
>
Factory Reset
.
Select one of the following:
FactoryReset
to perform a factory reset.
DeviceReset
to perform a device reset, which reboots the RFDXX device.
Tap
RESET
.
General Settings