• Workcloud Communication Voice Client 9.x
Configuring the CME PBX
Configuring the CME PBX

Configuring the CME PBX

Before you can configure Zebra Voice, you must configure the CME PBX.
  1. Verify that the CME PBX software is at version of 9.1 or above.
  2. Collect the necessary information.
    • The type of phone that is being emulated by each mobile device.
    • The radio MAC address of each mobile device.
    • The extension number that is assigned to each mobile device.
  3. Login using your credentials.
  4. Add a new phone.
  5. Select phone button templates.
  6. Define customer-specific phone button template (PBT).
  7. Configured and labeled lines (up to six).
  8. Check the configuration of the mobile device.
  9. Set Directory/extension number.
  10. Set Caller ID.
Opening the Cisco CME Command Line Interface
Adding Directory Numbers
Add New Phone
Committing Changes
Assign Multiple Lines per Device
Customize Line Labels and Caller ID
Customize the Zebra Voice Status Bar Message
Push Buttons from CME