1. Workcloud Communication Voice Client 9.x Administrator Guide for Cisco CME
  2. Configuring the CME PBX
  3. Push Buttons from CME
  • Workcloud Communication Voice Client 9.x
Push Buttons from CME

Push Buttons from CME

In order to push buttons to the WFCVC, create a template with the desired buttons, and apply the template to the device configuration.
Pushing Buttons from CME
The DHCP server provides network configuration parameters directly to DHCP clients. DHCP relay passes DHCP requests received on one interface to an external DHCP server located behind a different interface.
Cisco IP Phones download their configuration from a TFTP server. When a Cisco IP Phone starts, if it does not have both the IP address and TFTP server IP address preconfigured, it sends a request with option 150 to the DHCP server to obtain this information. A maximum of two TFTP servers can be identified using option 150.
For more information on configuring the CME, review the Cisco Best Practices Guide. If you need assistance, contact Zebra Support at: www.zebra.com/support.