Charging Using a 1-Slot Cradle
Charging Using a 1-Slot Cradle

Charging Using a 1-Slot Cradle

This section describes how to charge the device using an ET40/ET45 1-Slot Cradle.
  1. Align the device with the alignment marks (1) on the cradle.
    Illustration of 1-Slot cradle with callouts to alignment markings
  2. When using a tablet with an installed Power Pack, the user must press the Power Pack's Charge Indicator button to initiate charging the tablet and Power Pack.
  3. Insert the device into the cradle (1) and rotate it backward (2) until it clicks.
    Tablet going into 1-slot cradle
    The device is locked in the cradle, and the device Charging LED indicates charging.
  4. To remove the device from the cradle, rotate the device forward slightly (1) and lift it out of the cradle (2).
    Rotate tablet slightly and lift out of the cradle