Go to the Zebra Support & Downloads web site at zebra.com/support and download the appropriate Enterprise Reset file to a host computer.
Connect the device to a host computer using a USB-C cable.
When transferring files or debugging, make sure there is only one USB connection to the device. For example, if using a USB cable, do not dock the device or attach an expansion back.
Go to
Settings
.
Touch
System
Advanced
Developer options
.
Slide the
USB debugging
switch to the
ON
position.
If the device and host computer are connected for the first time, the
Allow USB debugging?
dialog box with the
Always allow from this computer
check box displays. Select the check box, if required.
Touch
OK
.
On the host computer command prompt window type
adb sideload <file>
where: <file> = the path and filename of the zip file.
Type
adb devices
.
The following displays:
List of devices attached
XXXXXXXXXXXXXXX device
Where XXXXXXXXXXXXXXX is the device number.
If the device number does not appear, ensure that the ADB drivers are installed properly.
Press
Enter
.
The System Recovery screen appears on the device.
Press
Volume Up
and
Volume Down
to navigate to
Apply upgrade from ADB
.
Press
Power
.
On the host computer command prompt window type
adb sideload <file>
where: <file> = the path and filename of the zip file.
Press
Enter
.
The Enterprise Reset package installs and then the System Recovery screen appears on the device.
