• ET40/45 Enterprise Tablet
Removing the Expansion Back
Removing the Expansion Back

Removing the Expansion Back

Follow this procedure to safely remove the Expansion Back.
Power off the device before removing the Expansion Back.
  1. Using a T5 Torx screwdriver, remove four screws securing expansion back to the device.
  2. Lift Expansion Back off the device.
  3. Insert the tabbed end of the battery cover into the slots in the battery well (1).
  4. Rotate the cover down (2).
    Insert battery cover, tabbed end first
  5. Carefully press down around the edges of the cover. Make sure that the cover is seated properly.
    Press down all edges of battery cover
  6. Press
    Power
     to turn on the device.