Performing a Factory Reset Using ADB

Performing a Factory Reset Using ADB

Initiate a Factory Reset on the ET40/ET45 using ADB.
Go to the Zebra Support & Downloads web site at zebra.com/support and download the appropriate Factory Reset file to a host computer.
  1. Connect the device to a host computer using a USB-C cable.
    When transferring files or debugging, ensure only one USB connection to the device exists. For example, do not dock the device or attach an expansion back if using a USB cable.
  2. Go to
    Settings
    .
  3. On Android 11, touch
    System
    Advanced
    Developer options
    .
  4. On Android 13, touch
    System
    Developer options
    .
  5. Slide the
    USB debugging
    switch to the
    ON
    position.
  6. If the device and host computer are connected for the first time, the
    Allow USB debugging?
    dialog box with the
    Always allow from this computer
    check box displays. Select the check box, if required.
  7. Touch
    USB Debugging
    . A check appears in the check box. The
    Allow USB debugging?
    dialog box appears.
  8. Touch
    OK
    or
    ALLOW
    .
  9. On the host computer, open a command prompt window and use the adb command:
  10. Press
    Up
    and
    Down
    to navigate to
    Apply upgrade from ADB
    .
  11. Press
    Up Arrow
    and
    Down Arrow
    to navigate to
    Full OTA Package
    .
  12. Use
    Up
    and
    Down
    to navigate to
    Full OTA Package
    .
  13. Press
    Power
    .