1. MC3400/MC3450 Quick Start Guide
  2. Installing a microSD Card
  • MC3400/MC3450 Mobile Computer
Installing a microSD Card

Installing a microSD Card

The microSD card slot (located under the battery pack) provides secondary, non-volatile storage. For more information, refer to the documentation provided with the microSD card and follow the manufacturer’s recommendations for use. It is strongly recommended that you format the microSD card on the device before use.
Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
  1. Remove the battery:
    1. Push in the two battery release buttons.
      Pushing battery release buttons.
      The battery ejects slightly.
    2. Remove the battery from the compartment.
      Removing the battery carefully.
  2. Using a coin or finger, remove the access cover.
    Removing the access cover with a coin.
  3. Slide the microSD card holder to the Open position.
    Sliding the holder to the Open position.
  4. Lift the microSD card holder.
    Lifting the microSD holder.
  5. Insert the microSD card into the contact area with the contacts facing down.
    Placing microSD card with contacts down.
  6. Close and slide the microSD card holder to the Lock position.
    Closing the microSD holder and sliding to lock it.
  7. Re-install the access cover.
    Re-install the access cover.
  8. Re-install the battery.