Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
6GHz for Cisco WLAN Best Practices Guide
Channel and Regulatory Information
Sub-Bands
Best Practices for Wi-Fi 6E (Tri-Band) including Voice, with Cisco WLAN Infrastructure
Best Practices for Wi-Fi 6E (Tri-Band) including Voice, with Cisco WLAN Infrastructure
Introduction
Device Settings
Target Wake Time
11k Lite
11k Full
Channel Width
Band Preference
Country-Specific Allowed Preferred Scanning Channels (PSC)
Common Infrastructure Setting Recommendations
Channel Width Settings
Target Wake Time
Multiple BSSID
Data Rates
Cisco Infrastructure Setting Recommendations
PSC Enforcement
Security Recommendations While Deploying Zebra Clients in 6GHz Network
WPA3 Enterprise
WPA3 Personal
Enhanced Open
Supported WPA3 Combinations in Order of Priority
Zebra-Recommended WLC and AP Models by Vendor
Channel and Regulatory Information
List of Channels
Sub-Bands
Regulatory Information
Channel Width and Power Spectral Density
Standard Power
Low Power Indoor
Tx Power Per Channel 5GHz Versus 6 GHz
Band Preference
Reduced Neighbor Report and 802.11kv
Voice Calls, Video Streaming, and Conferencing
Multiuser MIMO
Zebra Devices Operating with Standard Power
Glossary of Abbreviations
Sub-Bands
Sub-Bands
6GHZ Sub-Bands
Name of Band
Frequency (GHz)
Channels
PSC Channel Numbers
U-NII-5
5.925-6.425
1-93
5, 21, 37, 53, 69, 85
U-NII-6
6.425-6.525
97-113
101
U-NII-7
6.525-6.875
117-185*
117, 133, 149, 165, 181
U-NII-8
6.875-7.125
185*-233
197, 213, 229
(*) Channel 185 (6875MHz) overlaps both U-NII-7 and U-NII-8 bands.
North America and a few other countries have adopted the entire band from 5.925 GHz to 7.125 GHz. The European countries have adopted only the U-NII-5 band.
For a list of countries that have enabled the 6GHz band and the specific approved sub-bands, go to:
wi-fi.org/countries-enabling-wi-fi-6e
Channel and Regulatory Information