1. Zebra Print User Guide
  2. Printer Settings
  • Zebra Print User Guide
Printer Settings

Printer Settings

Update settings, such as print speed and darkness level, for a selected printer.
  1. Tap next to a printer to update settings for that printer.
  2. Scroll to review and update all printer settings:
    • Media Type
       - Tap an option from the drop-down menu:
      Options available vary depending on the printer used.
      • Continuous
         - Lengths of tag rolls
      • Mark
         - Clear pre-cut shaped labels with marks on the backing paper
      • Gap/Notch
         - Media includes a separation (notch) where one label / format ends and the next begins
      • Auto Select
         - Allow the printer to select the media type
    • Media Handling
       - Select an option:
      • Select
        Fit to Page
         to scale the document to accommodate the media size.
      • Select
        Variable Length
         to print different length documents. This option is only available when the
        Continuous
         media type is selected.
        Optionally change the
        Print Preview Length
         which specifies the length used in the print preview. Set a value just greater than your maximum length document to optimize the print preview. This does not affect printed output.
        See Printing a PDF Document and Printing Browser Content for information on the type and specifications of documents that can use the
        Variable Length
         option.
           
    • Media Size
       - Enter the
      Width
       and
      Length
       of the labels within the allowed range.
    • Use the sliders to update the
      Print Speed
       and
      Darkness
       levels. The
      Preview
       field reflects the
      Darkness
       level selected.
  3. Tap
    Save
     after adjusting settings.