Installing the power supply units (PSU) can be achieved with the shelves in position.
Rack Shelf Parts
1
Shoulder Screws
2
DC Cable Aperture
3
Network Cable Aperture
4
Cradle Fixing Holes
For Rack Model 2, it is easier to install the shelves with one side of the shelves removed to gain access to the other side, as it is a double-sided rack.
The process of installing the PSU can also be achieved with the shelves removed from the rack (only if the shelves are not going to be networked). Refer to PSU Installation for instructions.
The shelf shown is the standard shelf using shoulder screws. Information on other types of shelves is available upon request. These include shelves that will house two 2-slot cradles and four single-slot cradles.
