A high-touch current earth connection is essential before connecting the supply.
A high leakage current earth connection is essential before connecting the supply.
This product is class I and requires an Earth connection. The supplied mains lead must be used, or if replaced, it must be of the same or higher rating and have three conductors, Live, Neutral and Earth.
To avoid electrical shock, do not touch the metal prongs of the plug when installing or removing the plug to or from the mains outlet.
Failure to properly ground this equipment can cause electrocution or serious shock, particularly when used near other metal objects such as plumbing or structural metal work, such as mezzanine floor supports.
If the power cable is worn, cut or damaged in any way, it must be replaced immediately to avoid shock or fire hazard.
Before any installation or maintenance operations, ensure the equipment has been turned off and fully isolated. This may be achieved by switching off the mains and disconnecting the mains plug from the mains outlet.
Check that the installed power supplies do not exceed the stated maximum rating.
Ensure that the Rack is installed inside a building. It must not be installed outdoors or in a location that is subject to weather conditions.
