1. Workcloud Communication Voice Client 9.x Administrator Guide for Avaya Aura
  2. Configuring the Aura PBX
  3. Creating Users
  • Workcloud Communication Voice Client 9.x
Creating Users

Creating Users

The procedure described in this section for creating a user in the Avaya Aura System Manager is for demonstration purposes.
The procedure and parameters may vary, depending on your version of the System Manager and system configuration. Refer to Avaya documentation for the exact steps in creating a user.
  1. Open the Avaya Aura System Manager.
  2. Verify that the Avaya Aura software is at version of 6.x or above.
  3. Click
    Home
    .
  4. Click
    Users Management
    .
  5. Click
    User Management
    .
  6. Click
    Manage Users
    .
  7. Click
    New
    .
  8. Enter the
    Last Name
    ,
    First Name
     and
    Login Name
    .
  9. Set Authentication Type to Basic.
  10. Click
    Communication Profile
     tab.
  11. Enter the
    Communication Profile
     password.
  12. Click
    New
     to add a Communication Address.
  13. In the
    Type
     drop down, select Avaya SIP.
  14. In the
    Fully Qualified Address
     field, enter the extension number and domain.
  15. Click
    Add
    .
  16. Make sure
    Session Manager Profile
     is checked.
  17. Enter the
    Primary Session Manager
    ,
    Origination Sequence
    ,
    Termination Sequence
     and
    Home Location
     as shown in the SIP Registration.
  18. In the
    System
     drop down, select CM.
  19. In the
    Profile Type
     drop down, select Endpoint.
  20. In the
    Extension
     field, enter the
    Extension
    .
    Click the
    Endpoint Editor
     button to configure the buttons and features for that handset on Communication Manager.
  21. In the
    Template
     drop down, select 9611SIP_DEFAULT_CM_6_3.
  22. Go back to Manage Users.
  23. Click
    Commit
    .