Device Features

This section lists and describes the features of the ET401 tablet.

8 in. and 10 in. Device Front View
Number	Item	Description
1	Front scan button	Initiates barcode data capture when a scan-enabled application is active.
2	Touch screen	Displays all information needed to operate the device.
3	Charging indicator LED	Indicates power state and battery charging status while charging and application-generated notifications.
4	Front camera	Use for video conferencing.
5	Light sensor	Determines ambient light for controlling display backlight intensity.
6	Power button	Turns the display on and off. Press and release to power on the device. Press and hold to reset the device or power off.
7	Programmable button	Button that is configurable for use with applications.
8	Data capture LED	Illuminates during data capture.
9	Scan window	Provides data capture using the imager.
10	USB-C port	Provides USB host and client communications.
11	Right speaker	Provides audio output.
12	Cradle alignment indicator	Use to assist in aligning the tablet with a cradle.
13	Interface connector	Provides communication to the device from the dock.
14	Left speaker	Provides audio output.

8 in. and 10 in. Device Rear View
Number	Item	Description
1	Cradle latching slot	Used by cradles to secure the tablet.
2	Battery cover	Provides access to the replaceable battery.
3	Ultra-Wide-Angle (UWA) rear camera	Captures a wider field of view for detailed photos (available on premium SKUs only).
4	Rear microphone	Use for audio recordings.
5	Rear camera	Autofocus camera that takes photos.
6	Rear camera LED flash	Provides illumination for the camera.
7	Battery cover notch	Lift the notched section of the battery cover to remove the battery cover from the tablet.
8	Top scan button	Initiates barcode data capture when a scan-enabled application is active (programmable).
9	Top microphone	Use for voice communications or audio recordings.
10	Volume up button	Increases audio volume.
11	Volume down button	Decreases the audio volume.