Connect the ET40/ET45 to a Wi-Fi network to access the internet.
Touch
Network & internet
.
Go to
Settings
.
Scroll through the list and select the desired WLAN network.
For open networks, touch the profile once or press and hold and then select
Connect
or for secure networks, enter the required password or other credentials, then touch
Connect
. See the system administrator for more information.
The device obtains a network address and other required information from the network using the dynamic host configuration protocol (DHCP) protocol. To configure the device with a fixed internet protocol (IP) address, see Configuring the Device to Use a Static IP Address.
On A13, touch
Internet
to open the Internet screen. The device searches for WLANs in the area and lists them.
For open networks, touch the profile once or press and hold and then select
Connect
or for secure networks, enter the required password or other credentials, then touch
Connect
. See the system administrator for more information.
The device obtains a network address and other required information from the network using the dynamic host configuration protocol (DHCP) protocol. To configure the device with a fixed internet protocol (IP) address, see Configuring the Device to Use a Static IP Address.
In the Wi-Fi setting field,
Connected
appears, indicating that the device is connected to the WLAN.
