Connecting the Printer to Your Wireless Network
Connecting the Printer to Your Wireless Network

Connecting the Printer to Your Wireless Network

If you wish to use the printer’s optional wireless print server, you must first connect the printer to your computer using one of the other available connections. While the printer is connected via one of those connections, you configure the printer to communicate with your Wireless Local Area Network (WLAN) through the wireless print server.
For additional information about Zebra print servers, refer to the ZebraNet Wired and Wireless Print Server User Guide. To download the latest version of this guide, go to zebra.com/manuals.
  1. Install the drivers as instructed in 安装驱动程序并连接到基于 Windows 的计算机.
  2. If necessary, configure the following printer settings. Contact your network administrator for the proper values for your network.
  3. Reset the network to allow changes to the network settings to take effect. See RESET NETWORK(重置网络).
  4. If the printer still does not connect, consider setting a static IP address by configuring the following additional settings, and then reset the network again. Contact your network administrator for the proper values for your network.