Running the Printer Installation Wizard
Running the Printer Installation Wizard

Running the Printer Installation Wizard

  1. On the last screen of the driver installer, leave
    Run the Printer Installation Wizard
     checked, and then click
    Finish
    .
    The printer driver wizard displays.
  2. Click
    Next
    .
  3. Click
    Install Printer Driver
    .
    The license agreement displays.
  4. Read and accept the terms of the license agreement, then click
    Next
    .
  5. Select the communication option that you want to configure for your printer:
    Connection type
    When and how to use this option
    Network Port
    If you plan to use an Ethernet (LAN) or wireless (Wi-Fi) connection.
    Wait for the driver to scan your local network for devices and follow the prompts.
    USB Port
    If you will connect through a USB cable.
    Connect the cable to the printer and to the computer. If the printer is already connected and powered on, you may need to remove the USB cable and install it again. The driver will automatically search for the model of the connected printer.
    Bluetooth Port
    If you will be using a Bluetooth connection.
    Other
    You will use another type of cable such as Parallel (LPT) and Serial (COM). No additional configuration is necessary.
  6. If prompted, select your printer model and resolution.
    This information is listed on the printer configuration label. See Printing a Test (Printer Configuration) Label.
  7. Follow the Installation Wizard prompts to complete the installation.