Test-Printing using Zebra Setup Utilities

Test-Printing using Zebra Setup Utilities

After installing the printer drivers on your Windows PC and successfully connecting your printer to the computer using the Installation Wizard, try a test print to make sure the printer is connected.
Use these steps to print a configuration a label using Zebra Setup Utilities (ZSU):
  1. Open the Zebra Setup Utilities.
  2. Click on the newly-installed printer’s icon to select the printer and activate the printer configuration buttons located below it in the window.
  3. Click
    Open Printer Tools
    .
  4. In the
    Print
    tab window, click on the
    Print configuration label
    line, then click
    Send
    .
The printer should print a configuration status label. See Diagnostics and Troubleshooting for tips on diagnosing and resolving print issues.