Externally-Mounted Roll Media Considerations
Externally-Mounted Roll Media Considerations

Externally-Mounted Roll Media Considerations

Ensure that externally mounted roll media is properly configured.
  • The media should ideally enter the printer through the fanfold media slot in the rear of the printer.
  • Lower the print speed to decrease the chance of motor stalls. A loaded media roll typically has the highest inertia when the printer gets it moving. Larger media roll diameters require the printer to apply more torque to get the roll moving.
  • When mounted on your media stand, the media should move smoothly and freely. It should not slip, skip, jerk, bind before moving or as it moves.
  • The printer should NOT touch the media roll.
  • The printer should NOT slip or lift up off the operating surface.