Determining the Media Handling Method
Determining the Media Handling Method
View content for :
Product:

Determining the
Media Handling Method

Before loading media, decide on a media handling method that matches the media being used and the printer options available.
Printer Options
1
Tear-Off (standard)
2
Peel option
3
Cutter option
Media
Handling Methods
and Printer Options
Method
Required Printer Option
Description
Tear Off
Can be used with any printer option and most media types.
The printer prints label formats as it receives them. The printer operator can tear off the printed labels when the printer stops.
Peel Off
Peel option
The printer peels the label from the backing during printing and then pauses until the label is removed.
Cutter
Cutter option
The printer cuts between labels after each one is printed.
Delayed Cut
Cutter option
The printer waits for a delayed cut ZPL command (
~JK
) before it cuts the last printed label.
Applicator, Linerless Peel, Linerless Rewind, Linerless Tear, Linerless Cut, and Linerless Delayed Cut are options reserved for future use.
  1. Select a method that matches the media being used and the printer options available.