This self test can be used to provide the test labels required when making adjustments to the printer’s mechanical assemblies or to determine if any printhead elements are not working.
The following shows a sample printout.
PAUSE Test Label
Turn off (O) the printer.
Press and hold
PAUSE
while turning on (I) the printer. Hold
PAUSE
until the first control panel light turns off.
The initial self test prints 15 labels at the printer’s slowest speed, and then automatically pauses the printer. Each time
PAUSE
is pressed, an additional 15 labels print.
While the printer is paused:
Pressing
CANCEL
alters the self test. Each time
PAUSE
is pressed, 15 labels print at 152 mm (6 in.) per second.
Pressing
CANCEL
again alters the self test a second time. Each time
PAUSE
is pressed, 50 labels print at the printer’s slowest speed.
Pressing
CANCEL
again alters the self test a third time. Each time
PAUSE
is pressed, 50 labels print at 152 mm (6 in.) per second.
Pressing
CANCEL
again alters the self test a fourth time. Each time
PAUSE
is pressed, 15 labels print at the printer’s maximum speed.
To exit this self test at any time, press and hold
