Power Cord Specifications
Power Cord Specifications

Power Cord Specifications

Depending on how your printer was ordered, a power cord may or may not be included. If one is not included, or if the one that is included is not suitable for your requirements, consider the following information.
For personnel and equipment safety, always use an approved three-conductor power cord specific to the region or country intended for installation. This cord must use an IEC 320 female connector and the appropriate region-specific, three-conductor grounded plug configuration.
Power Cord Specifications
1
AC power plug for your country—This should bear the certification mark of at least one of the known international safety organizations (see Figure 2). The chassis ground (earth) must be connected to ensure safety and reduce electromagnetic interference.
2
3-conductor HAR cable or other cable approved for your country.
3
IEC 320 connector—This should bear the certification mark of at least one of the known international safety organizations (see Figure 2).
4
Length ≤ 3 m (9.8 ft). Rating 10 Amp, 250 VAC.
International Safety Organization Certification Symbols