Solutions
Products
Support and Downloads
About Zebra
FXR90 Integration Guide
FXR90 Integration Guide
About This Guide
Icon Conventions
Service Information
Getting Started
Features
FXR90 Parts
FXR90 LEDs
Installation and Communication
Unpacking the Reader
Flush Mounting the Reader
Mounting Tips
VESA Mount
WAN Antenna Bracket
Connecting Reader Antennas
Communication and Power Connection
Ethernet Connection
Ethernet: Power via External Power Supply
Ethernet: Power via PoE or PoE+
USB Connection
GPIO Interface Connection
Power Supply Options
Connecting the AC-DC Indoor Power Supply
Power Supply Mounting Pattern
Administrator Console
Reader Administrator Console
Auto Discovery
Connecting to the Reader
Connecting to the Reader via Command Prompt
Connecting via the Host Name
Connecting via IP Address
Using Link Local Networking when DHCP Server is Not Available
Administrator Console Login
First Time / Start-up Login
Logging In with Default User ID and Password
Admin Drop-down Menu
Change Password
Setting the Region
Administrator Console Option Selections
Antenna Status
Antenna Configuration
Network Settings
Configure Network Settings - Ethernet Tab
Ethernet IPv4
Ethernet IPv6
802.1x Configuration
802.1x - TLS Authentication
802.1x - TTLS/TLS Authentication
802.1x - PEAP/MSCHAPV2
802.1x - TTLS/MSCHAPV2
802.1x - PEAP/TLS
Wi-Fi Configurations
Connecting to the WPA2 Personal
Connecting to Hidden WiFi Network
WPA2 Enterprise Configurations
TLS
TTLS/TLS
PEAP/MSCHAPV2
PEAP/TLS
WPA3 Personal
Configure Network Settings - Bluetooth Tab
Bluetooth Connection
Connecting via an Android Device
Connect via Windows Device
Connecting via an iOS Device
GPIO
Applications
Firmware Update
Reader Certificates
System Log
Troubleshooting
Technical Specifications
802.1x - PEAP/MSCHAPV2
802.1x - PEAP/MSCHAPV2
802.1x - PEAP/MSCHAPV2
This section shows settings where outer authentication is PEAP and inner authentication is MSCHAPV2. User name and password are required.
802.1x Configuration - PEAP/MSCHAPV2
802.1x Configuration
