Wireless Local Area Network
Wireless Local Area Network

Wireless Local Area Network

Wireless local area networks (WLANs) allow the device to communicate wirelessly inside a building. Before using the ET40/ET45 on a WLAN, the facility must be set up with the required hardware to run the WLAN (sometimes known as infrastructure). The infrastructure and the device must both be properly configured to enable this communication.
To extend the life of the battery, turn off Wi-Fi when not in use.
Refer to the documentation provided with the infrastructure (access points (APs), access ports, switches, Radius servers, etc.) for instructions on how to set up the infrastructure.
Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the
Wireless & networks
settings configure the device to match the security scheme.
The device supports the following WLAN security options:
  • None
  • Enhanced Open
  • Wireless Equivalent Privacy (WEP)
  • Wi-Fi Protected Access (WPA)/WPA2 Personal (PSK)
  • WPA3-Personal
  • WPA/WPA2/WPA3 Enterprise (EAP) (A11 only)
    • Protected Extensible Authentication Protocol (PEAP) - with MSCHAPV2 and GTC authentication.
    • Transport Layer Security (TLS)
    • Tunneled Transport Layer Security (TTLS) - with Password Authentication Protocol (PAP), MSCHAP and MSCHAPv2 authentication.
    • Password (PWD).
    • Extensible Authentication Protocol Method for Subscriber Identity Module (SIM)
    • Extensible Authentication Protocol Method for Authentication and Key Agreement (AKA)
    • Improved Extensible Authentication Protocol Method for Authentication and Key Agreement (AKA')
    • Lightweight Extensible Authentication Protocol (LEAP).
  • WPA/WPA2-Enterprise (A13 only)
    • Protected Extensible Authentication Protocol (PEAP)
    • Transport Layer Security (TLS)
    • Tunneled Transport Layer Security (TTLS) - with Password Authentication Protocol (PAP), MSCHAP, MSCHAPv2, and GTC authentication.
    • Password (PWD)
    • Extensible Authentication Protocol Method for Subscriber Identity Module (SIM)
    • Extensible Authentication Protocol Method for Authentication and Key Agreement (AKA)
    • Improved Extensible Authentication Protocol Method for Authentication and Key Agreement (AKA')
    • Lightweight Extensible Authentication Protocol (LEAP)
  • WPA3-Enterprise (A13 only)
    • Protected Extensible Authentication Protocol (PEAP)
    • Transport Layer Security (TLS)
    • Tunneled Transport Layer Security (TTLS) - with Password Authentication Protocol (PAP), MSCHAP, MSCHAPv2, and GTC authentication.
    • Password (PWD)
    • Extensible Authentication Protocol Method for Subscriber Identity Module (SIM)
    • Extensible Authentication Protocol Method for Authentication and Key Agreement (AKA)
    • Improved Extensible Authentication Protocol Method for Authentication and Key Agreement (AKA')
    • Lightweight Extensible Authentication Protocol (LEAP)
  • WPA3-Enterprise 192-bit
The
Status
bar displays icons that indicate Wi-Fi network availability and Wi-Fi status.