Front Camera Photo Settings

Front Camera Photo Settings

  • Selfie Flash
    - Turns the screen white to help produce a little extra light in dimmer settings. Options: Off (default), or On.
  • Picture size
    - Set the size (in pixels) of the photo to: 5M pixels (default), 3M pixels, HD1080, 2M pixels, HD720, 1M pixels, WVGA, VGA, or QVGA.
  • Picture quality
    - Set the picture quality setting to: Low, Standard or High (default).
  • Countdown timer
    - Set to: Off (default), 2 seconds, 5 seconds or 10 seconds.
  • Storage
    – Set location to store the photo to: Phone or SD Card.
  • Continuous Shot
    - Select to take a series of photos quickly while holding the capture button. Off (default) or On.
  • Face Detection
    - Select to turn face detection Off (default) or On.
  • ISO
    - Set how sensitive the camera is to light. Options: Auto (default), ISO Auto (HJR), ISO100, ISO200, ISO400, ISO800 or ISO1600.
  • Exposure
    - Touch to adjust the exposure settings. Options: +2, +1, 0 (default), -1 or -2.
  • White balance
    - Select how the camera adjusts colors in different kinds of light, to achieve the most natural-looking colors.
    Icon
    Description
    Incandescent setting icon
    Incandescent
    - Adjust the white balance for incandescent lighting.
    Florescent setting icon
    Fluorescent
    - Adjust the white balance for fluorescent lighting.
    Auto setting icon
    Auto
    - Adjust the white balance automatically (default).
    Daylight setting icon
    Daylight
    - Adjust the white balance for daylight.
    Cloudy setting icon
    Cloudy
    - Adjust the white balance for a cloudy environment.
  • Redeye reduction
    - Helps eliminate redeye effect. Options: Disabled (default), or Enable.
  • ZSL
    - Set the camera to immediately take a picture when the button is pressed (default – enabled)
  • Selfie Mirror
    - Select to save a mirror image of the photo. Options: Disable (default), or Enable.
  • Shutter Sound
    - Select to play a shutter sound when taking a photo. Options: Disable (default) or Enable.
  • Anti Banding
    - Allows the camera to avoid problems caused by artificial light sources that are not constant. These sources cycle (flicker) fast enough to go unnoticed to the human eye, appearing continuous. The camera’s eye (its sensor) can still see this flicker. Options: Auto (default), 60 Hz, 50 Hz, or Off.