Installing the Battery

Installing the Battery

Follow these instructions to install the battery into the PS30 personal shopper.
  1. Using a Phillips (PH00) screwdriver, loosen the captive screw that secures the battery cover.
    Remove Battery Cover Screw
  2. Rotate the battery cover up, and remove it from the handle.
    Remove Battery Cover
  3. With the plastic tab facing the device's handle, press the battery's cable connector into the power connector. The connector is designed to fit only one way.
    Install Battery
  4. Position the battery inside the battery compartment.
  5. Insert the tabs on the battery cover into the handle, and then push the bottom of the battery cover down.
    Install Battery Cover
  6. Using a Phillips (PH00) screwdriver, tighten the screw that secures the battery cover to the device.
    Install Battery Cover Screw
  7. Press and hold the Scan key to power on the device.