Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
PS30 Quick Start Guide
Removing the USB Programming Cable
PS30 Quick Start Guide
PS30 Quick Start Guide
Unpacking the Device
Device Features
Installing the Battery
Replacing the Battery
Charging the Device
Imaging and Charging Indicators
Accessories for Charging
1-Slot Cradle
3-Slot Cradle
Releasing the Device from Locking Charging Cradles
Software Release Using the Menu
Software Release Using the Cradle Utility
Manual Release Using a Release Key
Manual Release from the 1-Slot Cradle
Manual Release from the 3-Slot Cradle
Installing the USB Programming Cable
Removing the USB Programming Cable
Soft Holster
Using the Belt Clip
Using the Shoulder Strap
Scanning Barcodes
Ergonomic Considerations
Removing the USB Programming Cable
Removing the USB Programming Cable
This section provides instructions for removing the USB programming cable and reinstalling the device's battery cover.
Touch and hold the scan key to wake the device.
Touch and hold
.
Touch
Power off
.
Rotate the battery cover portion of the programming cable up, and remove it from the handle.
Insert the tabs on the battery cover into the handle, and then push the bottom of the battery cover down.
Using a Phillips (PH00) screwdriver, tighten the screw that secures the battery cover to the device.
.
