Use the PS30 personal shopper to capture barcode data.
To read a barcode, a scan-enabled app is required. The device contains the DataWedge app, which allows you to enable the scanner to decode barcode data and display the barcode content.
Launch a scanning application.
Press the Scan key and aim the device at a barcode.
A red aiming dot, used for increased visibility in bright lighting conditions, displays.
Adjust the position of the device so that the red aiming dot appears at the center of the barcode.
Ensure that the barcode is within the area formed by the aiming pattern.
SE4710 Imager Decode Mode
SE4710 Imager Picklist Mode
When the PS30 is in Picklist Mode, the imager does not decode the barcode until the crosshair or aiming dot touches the barcode.
