TC22R Integrated Handheld RFID Reader

Replacing the Battery

Replace the battery in the device.

User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc., may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress Protection (IP)), impact performance (drop and tumble), functionality, temperature resistance, etc. could be affected. DO NOT put labels, asset tags, engravings, stickers, etc., in the battery well.

Do not add or remove the microSD card during battery replacement.

Press the Power button until the menu appears.

Touch

Power Off

.

Press the two latches down.

Do not attempt to insert fingers under the latches when pulling on the battery. This could damage the latches.

While pressing the latches down, press the two latches in toward the center of the device. The latches must be pressed in completely to release the battery.

Lift the battery from the handle.

Insert the replacement battery into the handle of the device.

The battery is keyed to ensure correct insertion. The notch on the battery faces the back of the device.

Press the battery down into the handle until the battery release latches snap into place.

Press the Power button to turn on the device.