1. TC22R Integrated Handheld RFID Reader Product Reference Guide
  2. Accessories
  3. 4-Slot Cradle Rack Installation
  4. Installing the 4-Slot Cradle on a Rack
  • TC22R Integrated Handheld RFID Reader
Installing the 4-Slot Cradle on a Rack

Installing the 4-Slot Cradle on a Rack

Ensure the tie-wrap buckle is on the side of the power supply. The tie-wrap buckle on top of the power supply interferes with the top tray.
  1. Place the power supply in the bottom tray.
  2. Connect the AC line cord to the power supply.
  3. Connect the DC line cord to the power supply.
  4. Secure power supply and cables to the bottom tray with tie wraps.
  5. Route cables through cable slots.
    1
    DC line cord
    2
    Power supply
    3
    AC line cord
  6. Secure four M2.5 studs to the top tray as shown.
    1
    Studs (4)
  7. Align and install the 4-Slot cradle onto the studs of the top tray.
    cradle on top
  8. Secure the cradle to the top tray with two M2.5 safety screws.
    1
    Safety Screws(2)
  9. Slide the top tray onto the bottom tray.
  10. Connect cables to the cradle.
  11. Secure the top tray to the bottom tray with four M5 screws (two on each side).
See Installing the Rack Mount for installing the bracket assembly onto a rack.