The RS4000 Scanner is compatible with the WT6400 wearable computer.
Connect the scanner interface cable to the device interface connector. If the device is mounted on the arm, connect the cable to the interface connector closest to the wrist.
1
Interface connector
2
Cable connector
If using the extended cable configuration, route the scanner cable up to the shoulder and down to the hand that the scanner mounts on. Attach two cable clips to clothing and secure cable to cable clip.
Rotate the trigger assembly to the correct position for the hand that the scanner mounts to.
Slide the scanner onto the index finger with the scan trigger next to the thumb.
Tighten the finger strap.
Soft boot the wearable terminal. See Performing a Soft Reset for information on performing a soft boot.
