1. ZT510 Industrial Printer User Guide
  2. Specifications
  3. General Specifications
  • ZT510 Industrial Printer User Guide
General Specifications

General Specifications

This table displays general specifications of the printer.
Height
395.68 mm (15.58 in.)
Width
268.2 mm (10.56 in.)
Depth
512.3 mm (20.17 in.)
Weight
22.7 kg (50 lb)
Temperature
Operating
Thermal Transfer: 5° to 40°C (40° to 104°F) Direct Thermal: 0° to 40°C (32° to 104°F)
Storage
–30° to 60°C (–22° to 140°F)
Relative Humidity
Operating
20% to 85%, non-condensing
Storage
20% to 85%, non-condensing
Communication Interface Specifications
Standard
Bluetooth® LE
  • Limitations and Requirements
    • Many mobile devices can communicate with the printer within a 30-foot radius of the printer.
  • Connections and Configuration
    • Refer to the Zebra Bluetooth User Guide for specific instructions for configuring your printer to use a Bluetooth interface. A copy of this manual is available here.
Zebra PrintTouch/Near Field Communication (NFC)
  • Limitations and Requirements
    • NFC communication must be initiated by touching your device to the appropriate location on the printer.
  • Connections and Configuration
    • Some devices may not support NFC communication with the printer until you alter their settings.
USB 2.0 Data Interface
  • Limitations and Requirements
    • Maximum cable length of  5 m (16.4 ft).
  • Connections and Configuration
    • No additional configuration is necessary.
Wired Gigabit Internal Ethernet Print Server
  • Limitations and Requirements
    • The printer must be configured to use your LAN.
    • A second wired print server can be installed in the bottom option slot.
  • Connections and Configuration
    • Refer to the ZebraNet Wired and Wireless Print Servers User Guide for configuration instructions. A copy of this manual is available here.
RS-232/C Serial Data Interface
  • 2400 to 115000 baud
  • parity, bits/character
  • 7 or 8 data bit
  • XON-XOFF, RTS/CTS, or DTR/DSR handshake protocol required
  • Limitations and Requirements
    • You must use a null-modem cable to connect to the printer or a null-modem adapter if using a standard modem cable.
    • Maximum cable length of 15.24 m (50 ft).
    • You may need to change printer parameters to match the host computer.
  • Connections and Configuration
    • The baud rate, number of data and stop bits, the parity, and the XON/XOFF or DTR control must match those of the host computer.
Optional
Wireless print server
For more information, see Wireless Specifications.
  • Limitations and Requirements
    • Can print to the printer from any computer on your Wireless Local Area Network (WLAN).
    • Can communicate with the printer through the printer’s web pages.
    • The printer must be configured to use your WLAN.
    • Can be installed only in the top option slot.
  • Connections and Configuration
    • Refer to the ZebraNet Wired and Wireless Print Servers User Guide for configuration instructions. A copy of this manual is available here.
USB host port
  • Limitations and Requirements
    • You can only plug one device into the USB host port. You cannot use a third device by plugging it into a USB port on one of the devices, nor can you use an adapter to split the USB host port on the printer to accept more than one device at a time.
  • Connections and Configuration
    • No additional configuration is necessary.
IEEE 1284 Bidirectional Parallel data interface
  • Limitations and Requirements
    • Maximum cable length of 3 m (10 ft).
    • Recommended cable length of 1.83 m (6 ft).
    • No printer parameter changes required to match the host computer.
    • Can be installed in either the top or bottom option slot.
  • Connections and Configuration
    • No additional configuration is necessary.
External ZebraNet 10/100 Print Server
  • Requires the parallel data interface option
Memory
1 Gigabyte DRAM (32 MB user available)
2 Gigabyte Flash (512 MB user available on-board Flash)