Running the Printer Installation Wizard
Running the Printer Installation Wizard

Running the Printer Installation Wizard

  1. On the last screen of the driver installer, leave
    Run the Printer Installation Wizard
    checked, and then click
    Finish
    .
    The printer driver wizard displays.
  2. Click
    Next
    .
    You are prompted to select an installation option.
  3. Click
    Install Printer
    .
    The license agreement displays.
  4. Read the important information and agree to the terms by selecting the
    I Accept the Terms in the License Agreement
    button. Click
    Next
    .
    You are prompted to select a printer type. The model of the printer is located on the top next to the tear bar, or on the part sticker located underneath the printer.
  5. Click
    Next
    .
    You are notified that the printer is already installed.
  6. Click
    Add new printer
    .
    You are prompted for a printer name, the port to which the printer will be connected, and the language for the printer display. Select
    USB001
    .
  7. Click
    Next
    .
    You are prompted to launch other setup wizards.
  8. Click
    Finish
    .
    After you install the drivers, connect the USB cord to the USB port on your printer (refer to Cable Communication).
    As the printer boots up, your computer completes the driver installation and recognizes your printer. If you did not install the drivers first, see What to Do If You Forget to Install Printer Drivers First.