Beeper Sequence | LED | Indication |
|---|---|---|
Standard Use | ||
Low, medium, high | Green | Power up |
User-configured | Green (blink off) | A barcode was decoded |
None | Center green LED remains ON | Presentation mode is on |
4 low | Red | Transmission error |
5 low | Red | Conversion or format error |
High, High, Low | Red | RS-232 receive error |
High | None | A <BEL> character is received over RS-232 |
None | Red Blinking | Scanner is disabled |
Image Capture | ||
Low | All green, blinking | Snapshot mode started |
Low | Green (default) LED mode | Snapshot mode complete |
High, low | Green (default) LED mode | Snapshot mode time-out |
Parameter Programming | ||
Low, high | Red | Input error: incorrect bar code, programming sequence, or Cancel scanned |
High, low | Green | Number expected; enter value using numeric bar codes |
High, low, high, low | Green | Successful program exit with a change in parameter setting |
ADF Programming | ||
High, Low | Green | Number expected, enter another digit. Add leading zeros to the front if necessary. |
Low, Low | Green | Alphanumeric expected, enter another alphanumeric character or scan the End of Message barcode |
High, High | Green blinking | ADF criteria or action is expected, enter another criteria or action or scan the Save Rule barcode |
High, Low, Low | Green | All criteria or actions cleared for current rule, continue entering rule |
High, Low, High, Low | Green (turns off after blinking) | Rule saved. Rule entry mode exited. |
Low, High | Red | Rule error. Entry error, wrong barcode scanned, or criteria/action list is too long for a rule. Re-enter criteria or action. |
Low | Green | Deleted last saved rule. The current rule is left intact. |
Low/high/high | Green | All rules deleted |
Low, High, Low, High | Red | Out of rule memory. Erase some existing rules, then try to save rule again. |
Low, High, Low | Green (turns off after blinking) | Cancel rule entry. Rule entry mode exited because of an error or the user asked to exit rule entry. |
Macro PDF | ||
2 Low | None | Buffered File ID error. A barcode not in the current MPDF sequence was scanned. |
2 Long Low | None | File ID error. A barcode not in the current MPDF sequence was scanned. |
3 Long Low | None | Out of memory. There is not enough buffer space to store the current MPDF symbol. |
4 Long Low | None | Bad symbology. Scanned a 1D or 2D barcode in an MPDF sequence, a duplicate MPDF label, a label in an incorrect order, or trying to transmit an empty or illegal MPDF field. |
5 long low | None | Flushing MPDF buffer |
Fast Warble | None | Aborting MPDF sequence |
Low, High | None | Flushing an already empty MPDF buffer |
LED Indicators | ||
None | Slow Blinking Green | Scanner connected to 123Scan |
None | Fast Blinking Red | File being transferred to the scanner (parameters and firmware) |
None | Slow Blinking Red | Firmware being activated on the scanner, loaded into memory |
None | Solid Green | Programming completed successfully (parameters and firmware) |
None | Solid Red | Error State |
