1. SM20 Integration Guide
  2. Installation
  3. Mounting the SM20 to a Stand
  • SM20 Integration Guide
Mounting the SM20 to a Stand
View content for :
Product:

Mounting the
SM20
 to a Stand

Mount the
SM20
 on its stand and connect it to a host device. The hands-free scanner's angle can be adjusted to suit your scanning requirements.
  1. Align the mounting rails of the stand with the mounting rails on the bottom of the
    SM20
    .
  2. Slide the stand's mounting rails into the
    SM20
     until the mounting rail's edge is flush with the scanner housing.
    Scanner slides onto stand rails.
  3. Connect the host cable to the scanner's host port.
    Cable inserts into the host port.
  4. Connect the host cable to your host device.
    The scanner powers on.
  5. Adjust the stand's angle to suit your scanning requirements.
    The stand adjusts from -14° to +30°.