1. Zebra Access Management System (ZAMS) Installation Guide
  2. SSO Configuration
  3. Identify Guardian Configurations
  4. Application Configuration
  • Zebra Access Management System (ZAMS) Installation Guide
Application Configuration

Application Configuration

To configure the application:
  1. Navigate to
    Application Configuration
     and select
    Send Configuration
     (1).
    App Config
  2. Click
    Configure
     (1) for
    Usage Mode
    .
    Usage Mode
  3. Set the
    Application Mode
     to
    Authentication
     and
    Log Level
     to
    1
    .
    App Mode
    • Skip
      Enrollment Configuration
      .
    • Click
      Authentication Configuration
      .
    • Select
      Verification Setup 1
      .
    • In
      Verification Setup 1
      , configure the following:
      Primary
      • Comparison Source: None
         (1)
      • Primary Authentication Method:
        • Primary Authentication Factor: SSO (Single Sign On)
           (2)
        • Secondary Authentication Factor: None
           (3)
        • Fallback Authentication Method: Admin Bypass Passcode
           (4)
      • Click
        Lock Screen Event Options
         (1).
        Lock Screen
      • In the lock screen options, add the following:
        Lock Screen
        • On Unlock: None
           (1)
        • On Reboot: None
           (2)
        • On AC power connected: Verification Setup 1
           (3)
        • On AC power disconnected: None
           (4)
        • On device manual check-in: Verification Setup 1
           (5)
        • On user change: None
           (6)
        If
        Bluetooth Proximity
         is enabled in Portal, set
        On AC Power Connected
         as
        None
        .
  4. Click
    Force Logout Options
    .
    Force Logout Option
  5. Set
    On AC Power Connected
     as
    Enabled
     (1).
    If
    Bluetooth Proximity
     is enabled in Portal, set
    On AC Power Connected
     as
    Disabled
    .
  6. Save the configurations.