Workcloud Communication Voice Client 9x

Configuring Multiple PBX Types

Set the configuration parameters for additional PBX types using the GUI or XML.

When configuring multiple PBXs, ensure the server IP address and credentials point to the correct PBX call server as indicated by the profile type. For example, the profile must be configured with the IP address and credentials of a

WebEx

call manager.

In the GUI, PBXs are referred to as PBX Type, while in the XML, they are tagged as <profile_type>.

Go to

Settings

.

Touch

Connection Parameters

.

Touch

PBX#2 Configuration

.

Touch

PBX#2 Type

.

Select the PBX type that is the same as the target PBX call server.

Enter the configuration information.

Refer to the Getting Started chapter of the Zebra Voice Client Administrator Guide for the desired PBX type.

Touch the

Back

button to return to the Connection Parameters screen.

Repeat steps 5 through 7 for up to two more PBX types (optional).

Touch the

Back

button to return to the Zebra Voice home screen.

XML example of configuring multiple PBX types.

<WFConnect>
<Profile>
   <profile_type>Licensed PBX One</profile_type>
   <sip_userid>1001</sip_userid>
   <sip_userpass>1234</sip_userpass>
   <sip_localport>5060</sip_localport>
   <sip_remhost>10.5.97.99</sip_remhost>
   <sip_remport>5060</sip_remport>
   <sip_transport>UDP</sip_transport>
   <sip_realm>10.16.2.111</sip_realm>
   <profile2_type>Licensed PBX Two
   </profile2_type>
   <sip2_userid>1002</sip2_userid>
   <sip2_userpass>1234</sip2_userpass>
   <sip2_device_type>8865</sip2_device_type>
   <sip2_mac>00-11-22-33-44-55</sip2_mac>
   <sip2_localport>5060</sip2_localport>
   <sip2_remhost>10.5.97.99</sip2_remhost>
   <sip2_remport>5060</sip2_remport>
   <sip2_transport>UDP</sip2_transport>
   <sip2_realm>10.16.2.111</sip2_realm>
</Profile>
...
</WFConnect>