The Zebra Setup Utilities provides a quick and easy way to configure a Bluetooth wireless connection with your printer.
Double-click the
Zebra Setup Utilities
(ZSU) icon on your desktop.
Connect your computer and the printer with a USB cable.
On the first ZSU screen, highlight the printer displayed in the window and click
Configure Printer Connectivity
.
On the Connectivity type screen, select
Bluetooth
, then click
Next
.
On the Bluetooth Settings screen, check
Enabled
to enable Bluetooth functionality.
In the
Friendly Name
field, set the Bluetooth name of the device that you will use to discover the device on the network.
This is the name that the central device will apply to the printer.
If you want the device to appear when central devices are looking for new devices to pair with, set the
Discoverable
field to
On
. If not, set it to
Off
.
Set
Authentication
to
On
.
This setting does not exist in Link-OS Profile Manager, but you must set it to
On
if you want to enter a PIN in the Zebra Setup Utilities. The actual authentication setting on the printer is set by accessing
Advanced Settings
Security Mode
.
The values set in the
Authentication PIN
field will vary depending on the Bluetooth (BT) version of the central device. If the central uses BT v2.0 or older, enter a numeric value in this field. You will be prompted to enter this same value on the central device to verify pairing. Also select
Security Mode 2
or
3
in
Advanced Settings
for PIN paring.
If the central device uses BT v2.1 or newer, this setting has no effect. BT v2.1 and newer versions use Secure Simple Paring (SSP) which does not require the use of a PIN.
To view Advanced Bluetooth settings, click the
Advanced Settings...
button.
For more information on Advanced Settings, refer to the Wired and Wireless Print Server Guide.
Click
Next
to continue configuring your printer.
The SGD commands needed to configure your printer will be displayed.
On the Send Data screen, click on the printer that you want to send the commands to, or click
File
to save the commands to a file for reuse later.
To send the commands to the printer you chose, click
Finish
.
The printer will update and reboot.
You may disconnect the USB interface from your printer now.
To complete the Bluetooth pairing process, enable Bluetooth device discovery on your central device and follow the instructions provided by the central device.
