ZD888 Direct Thermal Desktop Printer User Guide

Running the Printer Installation Wizard

On the last screen of the driver installer, leave

Run the Printer Installation Wizard

checked, then click

Finish

.

The Printer Driver Wizard displays.

Click

Install Printer Driver

.

The license agreement displays.

Read and accept the terms of the license agreement, and then click

Select the communication option that you want to configure for your printer:

Network Port: For installing printers with an Ethernet (LAN) or wireless (Wi-Fi) network connection. Wait for the driver to scan your local network for devices and follow the prompts.

USB Port: For installing printers connected with the USB cable. Connect the printer to the computer. If the printer is already connected and powered on, you may need to remove the USB cable and install it again. The driver will automatically search for the model of the connected printer.

Bluetooth Port: For installing printers with a Bluetooth connection.

Other: For installation on another type of cable, such as Parallel (LPT) and Serial (COM). No additional configuration is necessary.

If prompted, select your printer model and resolution.

The model and resolution are listed on the printer configuration label. See Test Printing with the Configuration Report for instructions on printing a label.)