根据介质类型设置介质感应
Setting Media Sensing by Media Type

Setting Media Sensing by Media Type

Your printer's media-sensing settings must match the type of media you use. Sensing is automatic for some media types. The sensor can be aligned for others.
For web/gap media
The printer senses the differences between the label and the liner to determine the print format length.
For continuous roll media
The printer senses only the media’s characteristics.
The print format’s length is set through programming (using a driver or software), or based on the last stored form’s length.
For black mark media
The printer senses the beginning of the mark and the distance to the start of the next black mark to measure the print format length.
For other common media and setting variations
Do one of the following depending on the media you plan to use:
  • Load the media (see Loading the Media), then follow the steps in Using the Label Dispenser Option.
  • Follow the steps in Printing on Fanfold Media.