使用配置报告测试打印
Test Printing with the Configuration Report

Test Printing with the Configuration Report

Before you connect the printer to a computer, make sure that the printer is in proper working order. You can do this by printing a configuration report.
The information in the Configuration Report may be help with printer installation and troubleshooting.
  1. Make sure the media is loaded properly in the printer and the printer's top cover is closed.
  2. Turn printer power ON.
  3. After the printer is ready (STATUS indicator lights up solid green), press and hold the
    FEED
    button for approximately two  seconds, until the STATUS Indicator blinks once, then release the button.
The Printer and Network Configuration Reports prints. When the printer stops, the STATUS Indicator turns solid green.
If you cannot get these reports to print, see Troubleshooting.