1. ZD888 热敏桌面打印机用户指南
  2. Controls and Indicators
  3. User Interface
  • ZD888 Direct Thermal Desktop Printer User Guide
User Interface

User Interface

Your printer's user interface is designed to help you with a variety of routine tasks.
Interface Control
Description
1
Power
 button (see POWER Button)
The
Power
 button and the
FEED
 button—individually or in combination, and along with information shown by the STATUS indicator—are designed to help you perform a range of routine printer tasks which include:
  • turning printer power ON and OFF
  • calibrating the media (labels, paper, tags, etc.)
  • printing a configuration report
  • resetting printer settings to their defaults
  • entering 'Forced' firmware download mode
  • entering and exiting diagnostic (
    DUMP
    ) mode to debug printer programming and communications
These buttons are modal—what happens when you press the buttons depends on what the printer is doing at the time.
3
Single multi-functional
FEED
 (Advance) button (see FEED (Advance) Button)
2
STATUS Indicator (tricolor) (see Status Indicator for information on how to interpret the Status Indicator state and color.)
Indicates the printer's operating status and a range of printer conditions using state and color (such as when the printer runs out of media).
The state of the indicator can be:
  • on (lit)
  • off (not lit)
  • blinking (off and on) and alternating between colors in a variety of patterns
The color can be:
  • Green—ready or functioning
  • Amber (orange/yellow)—for busy or active process (boot-up, over-temperature cooling cycle, etc.).
  • Red—needs attention