1. TC53e/TC53e-RFID/TC58e Product Reference Guide
  2. Accessories
  3. Accessories for Charging
  4. 1-Slot Ethernet USB Charge Cradle
  5. Ethernet Settings
  6. Configuring Ethernet Static IP Address
  • TC53e/TC53e-RFID/TC58e Touch Computer
Configuring Ethernet Static IP Address
Configuring Ethernet Static IP Address

Configuring Ethernet Static IP Address

This device includes Ethernet cradle drivers. After inserting the device, configure the Ethernet connection.
  1. Go to
    Settings
    .
  2. Touch
    Network & internet
    Ethernet
    .
  3. Slide the switch to the
    ON
     position.
  4. Place the device into the Ethernet cradle slot.
  5. Touch
    eth0
    .
  6. Touch
    Disconnect
    .
  7. Touch
    eth0
    .
  8. Touch the
    IP
     settings list and select
    Static
    .
  9. In the
    IP address
     field, enter the proxy server address.
  10. If required, in the
    Gateway
     field, enter a gateway address for the device.
  11. If required, in the
    Netmask
     field, enter the network mask address.
  12. If required, in the
    DNS
     address fields, enter a Domain Name System (DNS) addresses.
  13. Touch
    CONNECT
    .
  14. Touch the Home button.