Configuring Ethernet Static IP Address
Configuring Ethernet Static IP Address

Configuring Ethernet Static IP Address

The device includes Ethernet cradle drivers. After inserting the device, configure the Ethernet connection:
  1. Go to
    Settings
    .
  2. Touch
    Network & internet
    >
    Ethernet
    .
  3. Place the device into the Ethernet cradle slot.
  4. Slide the switch to the
    ON
     position.
  5. Touch
    Eth0
    .
  6. Touch
    Disconnect
    .
  7. Touch
    Eth0
    .
  8. Touch and hold the IP settings drop-down list and select
    Static
    .
  9. In the
    IP
    address field, enter the proxy server address.
  10. If required, in the
    Gateway
    field, enter a gateway address for the device.
  11. If required, in the
    Netmask
     field, enter the network mask address
  12. If required, in the
    DNS address
     fields, enter a Domain Name System (DNS) addresses.
  13. Touch
    CONNECT
    .
  14. Touch Home.