Determining the Label Collection Method
Determining the Label Collection Method
View content for :

Determining the
Label Collection Method

Before loading media, decide on a label collection method that matches the media being used and the printer options available.
Printer Options
Tear-Off (standard)
Peel with Liner Take-Up option
Rewind option
Cutter option
Collection Methods
and Printer Options
Required Printer Option
Tear Off
Can be used with any printer option and most media types.
The printer prints label formats as it receives them. The printer operator can tear off the printed labels when the printer stops.
Peel Off
Peel, Liner Take-Up, or Rewind option
The printer peels the label from the backing during printing and then pauses until the label is removed.
The empty backing may be allowed to exit the front of the printer, or it may be wound onto the liner take-up spindle or rewind spindle.
Rewind option
The printer prints without pausing between labels. The media is wound onto a core after printing. The rewind plate is used to keep the labels from separating from the backing.
Cutter option
The printer cuts between labels after each one is printed.
Delayed Cut
Cutter option
The printer waits for a delayed cut ZPL command (
) before it cuts the last printed label.
Applicator port connection required. This mode is for use with a machine that applies labels.
The printer prints when it receives a signal from the applicator. Authorized Service Technicians should refer to the Advanced User Information section of the Maintenance Manual for additional information about the applicator interface.
Linerless Peel, Linerless Rewind, Linerless Tear, Linerless Cut, and Linerless Delayed Cut are options reserved for future use.
  1. On the Home screen, touch
    Label Position
    Collection Method
    The Collection Method options display.
  2. Select a method that matches the media being used and the printer options available.
  3. Touch the
    icon to return to the Home screen.