Pin A5 (CC) of the USB Type-C plug shall be connected to VBUS through resistor Rp (56 kΩ +/- 5%). Pin A5 (CC)
Contacts B6 and B7 should not be present in the USB Type-C plug.
All VBUS pins shall be connected together within the USB Type-C plug. Bypass capacitors are not required for the VBUS pins in this cable.
All ground return pins shall be connected together within the USB Tupe-C plug.
Shield and GND grounds shall be connected within the USB Type-C and USB 2.0 Standard-A plugs on both ends of the cable assembly.
All USB Type-C plug pins that are not listed in this table shall be open (not connected).